Kenwood TK-7180H Service Manual

Also see for TK-7180(H): Brochure & specs Specification Instruction manual Brochure & specs Instruction manual

Contents

TK-7180H/7182H43ADJUSTMENT (TK-7180H)ControlsPanel Test Mode■ Test mode operation featuresThis transceiver has a test mode.To enter test mode,press and hold the [A] key while turning the transceiverpower ON. Before the transceiver enters test mode, thefrequency version information appears on the LCD mo-mentarily. Test mode can be inhibited by programming. Toexit test mode, turn the transceiver power OFF. The follow-ing functions are available in test mode.■ Key operationKey “FNC” not appearsFunction Display[S] Shifts to Panel tuning mode -[A] Function on “FNC” appears[B] MSK 1200bps and 2400bps 2400bps : icon appears[C] Test signaling CH up Signaling No.[ ]/[ ] Test frequency CH up/down Channel No.[ ]/[ ] Volume up/down -[ ] Squelch on/off[■ ] Narrow/Wide 4k/Wide 5k Narrow : “n”,Wide 4k : “s”,Wide 5k : “w”Microphone key[PTT] Transmit -[0] to [9] Use as the DTMF keypad. -and [A], If a key is pressed during[B], [C], transmission, the DTMF[D], [#], corresponding to the key[*] that was presses is sent.Key “FNC” appearsFunction Display[S] High power / Low power Low : icon appears[A] Function off -[B] Compander on/off On : icon appears[C] Beat shift on/off On : icon appears[ ]/[ ] Function off -[ ]/[ ] Function off -[ ] Squelch level 0 On : icon appears[■ ] LCD all lights LCD all point appearsMicrophone key[PTT] Transmit -[0] to [9] Function off -and [A],[B], [C],[D], [#],[*]Notes :• If a [S], [A], [B], [C] key is pressed during transmission, theDTMF corresponding to the key that was pressed is sent.• The “Wide 4k” cannot be used, please skip it.• LED indicatorRed LED Lights during transmission.Green LED Lights when there is carrier.• Sub LCD indicator“FNC” Appears at function on.• LCD display in panel test modePowerswitchModularMIC jackProgrammablefunction keysVolumeUp/Down keyChannelUp/Down keyLCDn 1 1–Channel No.n : Narrows : Wide 4kw : Wide 5kSignaling No.