Kenwood TM-241A Instruction Manual

Also see for TM-241A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

5-2-2You can change the dial frequency while in the VFOmode. The frequency can then also be stored inmemory, or in the call channel using the techniquesthat will be described in this manual.~ ~ VFO modeMR aia keyFrequency SelectionVFO key CALL key\bsSewn CALL key[MEMORY channel mode fxg———} CALL channel mode= MR key@ VFO Mode Operation Frequency Selection1. Press the VFO/MPV key to select the VFO mode.2. Rotate the tuning control or press the microphoneUP/DWN switches to select the desired frequency.Memory Channel SelectionPress the MR/M key.Rotate the tuning control or press the microphoneUP / DWN switches to select the desired memorychannel. wo@ CALL Channel SelectionPress the CALL key to select the Call channel.nr@5-2-3The frequency step is indicated in the chart below.Frequency Step Selection57 102715220E12.5225TM-241A/ECorSGeoaS CG a)TM-441A/Eoh Se5)To select the desired tuning or scan step size use thefollowing procedure:1. Press the VFO/MPV key to select the VFO mode.2. Press the F key momentarily. The F indicator shouldlight in the display.3. Press the REV/STEP key within 10 seconds of pressingthe F key. The current frequency step size will bedisplayed.TM-541A/E x CO)