Kenwood TM-241A Instruction Manual

Also see for TM-241A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

and the third digit begins to flash.7. Select the third digit by rotating the Tuning control.8. Press the DR/DT key and the complete DTSS code isregistered. The mode returns to the previous one.@ Selecting and storing a code with the DTMFKEY PAD (MC-44DM)1. Press the DR/DT key to light the DTSS indicator.2. Press the F key, then press the DR/DT key while the Findicator is on (10 seconds). The DTSS code settingmode will be entered and the first digit of the codewill flash.3. Then enter a three-digit number on the key pad.aaofDOOSIO© Geeelo:OOOO pNotes1, lf a key other than the DR/DT key on the frontpannel is pressed during operation, code selectionmode is canceled.2. If no action is taken for longer than 10 seconds,code selection mode is automatically canceled.325-8-3 Selection using memory channels 1through 3@ Storing VFO frequencies and DTSS codes atthe same time1. Select the desired frequency to be stored in memoryin the VFO mode.. Follow steps 1 through 8 above in the VFO mode.. Press the F key. Select the desired memory channel (1, 2, or 3) withthe tuning control or the UP/DWN key on the micro-phone.PWN5. Press the MR/M key@ Rewriting DTSS codes in memory channels(1 to 3)1. Press the F key while the memory channel is operat-ing, then press the DR/DT key while the F indicator ison. The DTSS code setting mode will be entered andthe first digit of the code will flash.2. Store the selected code in memory.Follow steps 1 through 8 in VFO mode to edit astored code.