Kenwood TM-D700 E Instruction Manual

Also see for TM-D700A: Instruction manual Operation instruction Service manual

Contents

103GETTING ACQUAINTEDFRONT PANELNote: This section describes only the main functions of the front panelcontrols and buttons. For the functions not described here, you will findexplanations in the appropriate sections of the manual.qqqqq CALLbuttonRecalls the Call channel {page 39}. Also starts orstops Call/VFO Scan {page 54} when in VFO mode,or Call/Memory Scan {page 54} when in MemoryRecall mode.wwwww VFObuttonSelects the VFO mode. In this mode you can changethe operating frequency, using the Tuning control orMic [UP]/ [DWN]. Also provides:• VFO Scan start to scan the entire VFO range{page 50}.• Program Scan start to scan a programmed range offrequencies {page 52}.eeeee MRbuttonSelects the Memory Recall mode {page 37}. In thismode you can change memory channels, using theTuning control or Mic [UP]/ [DWN]. Also startsMemory Scan {page 50}.rrrrr TuningcontrolWhen turned, selects:• Operating frequencies when in VFO mode {page 20}.• Memory channels when in Memory Recall mode{page 37}.• Menu Nos. when in Menu mode {page 22}.This control is used for various other selections.When an up-arrow (c) and down-arrow (d) arevisible as button labels, the Tuning control functionsin exactly the same way as the up- and down-arrowkeys.ttttt MHzbuttonWhen pressed, selects the MHz mode. In this modeyou can change the operating frequency in 1 MHzsteps or 10 MHz steps {page 20}, using the Tuningcontrol or Mic [UP]/ [DWN]. Also starts MHz Scan{page 53}.