509MEMORY SCANUse Memory Scan to monitor all memory channelsprogrammed with frequency data.1 Select band A or B.2 Press [MR] (1 s).• Scan starts with the channel last recalled.• The 1 MHz decimal blinks while scanning is in progress.• To reverse the scan direction, turn the Tuning controlclockwise (upward scan) or counterclockwise(downward scan). You can also press Mic [UP]/ [DWN].3 To quit Memory Scan, press [MR] again.Note:uAt least 2 or more memory channels must contain data and must notbe locked out.uThe L0 to L9 and U0 to U9 memory channels are not scanned.uYou can also start Memory Scan when in Channel Display mode.While Scan is being interrupted, the channel number blinks.VFO SCANVFO Scan monitors all frequencies tunable on the band,using the current frequency step size.1 Select the desired band.2 Press [VFO] (1 s).• Scan starts at the frequency currently displayed.• The 1 MHz decimal blinks while scanning is in progress.• To reverse the scan direction, turn the Tuning controlclockwise (upward scan) or counterclockwise(downward scan). You can also press Mic [UP]/ [DWN].3 To quit VFO Scan, press [VFO] again.1 s1 s
