Kenwood TM-D700 E Instruction Manual

Also see for TM-D700A: Instruction manual Operation instruction Service manual

Contents

316AUTOMATIC REPEATER OFFSETThis function automatically selects an offset direction,according to the frequency that you select on the VHFband. The transceiver is programmed for offset directionas shown below. To obtain an up-to-date band plan forrepeater offset direction, contact your national AmateurRadio association.U.S.A. and Canada versionsThis complies with the standard ARRL band plan.European versionsNote: Automatic Repeater Offset does not function when Reverse is ON.However, pressing [REV] after Automatic Repeater Offset has selectedan offset (split) status, exchanges the receive and transmit frequencies.1 Press [MNU] to enter Menu mode.2 Press [ccccc]/ [ddddd] to select “RADIO (1–)”, then press[OK].3 Press [ccccc]/ [ddddd] to select “REPEATER (1–7–)”, thenpress [OK].4 Press [ccccc]/ [ddddd] to select “AUTO OFFSET (1–7–2)”,then press [OK].5 Press [ccccc]/ [ddddd] to switch the function ON (default) orOFF.6 Press [OK] to complete the setting.7 Press [MNU] to exit Menu mode.+ −−− + SSSS144.0 145.5 146.4 147.0 147.6145.1 146.0 146.6 147.4 148.0 MHzS: SimplexSSS: Simplex–144.0 146.0 MHz145.8145.6