Kenwood TM-D700A Instruction Manual

Also see for TM-D700A: Instruction manual Operation instruction Service manual

2346 Press [OK] to complete the setting.7 Press [MNU] to exit Menu mode.The keypad on the MC-53DM also is available to enteralphanumeric characters in step 3. Each press of a Mickey switches entry of characters as below:PROGRAMMING A PACKET PATHProgram a packet path to specify how APRS data shouldbe transferred via one or more repeaters. For furtherdescription, refer to “PACKET PATH AND DIGIPEATER”{page 9}. The default is “RELAY,WIDE” that is one of thecommon settings.1 Press [MNU] to enter Menu mode.2 Press [ccccc]/ [ddddd] to select “PACKET PATH (3–B)”, thenpress [OK].• The display for entering a packet path appears; the firstdigit blinks.3 Turn the Tuning control to select a character.• You can enter 0 to 9, A to Z, , (comma), and –.4 Press [aaaaa].• The cursor moves to the next digit.5 Repeat steps 3 and 4 to enter up to 79 digits.• You can enter up to 8 path segments in sequence; eachsegment must have less than 10 characters. Use acomma to separate each segment.1 Q Z 1 7 P R S 72 A B C 2 8 T U V 83 D E F 3 9 W X Y 94 G H I 4 0 05 J K L 5 # – ,6 M N O 6.ammocastresnI afoyrtneslecnaC .htaptekcaptatigidehtseteleD sirosrucehthcihw .gniknilbrosrucehtsesuaC .drawkcabevomotyltnerrucehtstresnI .retcarahcdetceles DNABtfel()LESdnastigidllasraelC otrosrucehtskcab .tigidtsrifeht