Kenwood TRC-80 Instruction Manual
Also see for TRC-80: Instruction manualService manual
                                 |
DISPLAY5 74 6 8TUNE I S.CALL I MENUEEl LNB SCAN LOCK OUT51 3 5 7 9 20 40 dBH M LRF 2 4 I 6 8 10CD EElAppears while receiving with the squelch open.mAppears while transmitting or while the antenna tuner istuning.NBAppears while the Noise Blanker function is ON.TUNEBlinks while the antenna tuner is presetting or tuning.Remains ON after a good match is obtained with theantenna system.SCANAppears while the Scan function is activated.@ S.CALLAppears while the Selective Call function is activated.LOCK OUTAppears when a channel is locked out from the Scanfunction. These channels are not scanned.@ MENUAppears while the Menu system is being accessed.@ 88Shows the selected channel number or, while accessingthe Menu mode, shows the selected Menu number.Your Dealer may have programmed the radiotelephoneso as not to display channel numbers.@ CHAppears while the Channel mode is selected.69 :11JQ@ IIIIIIIShows the receive and transmit frequencies ormessages that are stored by your Dealer. Themessages may include alphanumeric characters,spaces or symbols.S1 3 5 7 SI 20 40 cS...............AF 2 .. e 8 10While receiving, serves as an S-meter to display thereceived signal strength. While transmitting, serves asa relative transmit RF meter. While acting as an RFmeter, a full-scale indication corresponds to theprogrammed maximum power.@ H M LOne of these charactersappear as an indicationof thetransmit power level. The characters represent High,Medium,and Low power respectively. If none of thesecharactersare visible, either the maximum transmitpower is selected,or the Dealer has disabled thischaracter display.@ CLARIAppears while the CLARIFIER control is turned from itsdetent "0"position.@ USBAppears while Upper Sideband mode is selected.@ LSBAppears while Lower Sideband mode is selected.@ AMAppears while Amplitude Modulationmode is selected.@ CWAppears while ContinuousWave (Morse) mode isselected.@ DATAAppears while Data mode is selected. |
Related manuals for Kenwood TRC-80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine