34Remote SetupChapter Two : Setting Up PowerTouchNavigating PowerTouch InterfaceFor the rest of this chapter, you will be using the varioussettings on the Setup menu. The Setup menu includes thefollowing settings and their subsettings:• Preference, which contains the following:• IR (“Identifying Devices For PowerTouch Control”on page␣ 37)This menu setting allows you to identify your con-nected devices to PowerTouch.• Input (VR-4900/VR-4700/KRF-V9993D Users’Guide).• Multi Room (“Chapter Four: Setting Up MultipleRooms” on page 45) VR-4900/KRF-V9993D only.This menu setting allows you to activate dual-Roomcontrol, and to select which room you want to con-trol with PowerTouch.• Copy (VR-4900/VR-4700)This menu will allow you to copy all the settingsstored in your PowerTouch to a second PowerTouch.Instructions are included in separately soldPowerTouch package.• Surround (“Setting Up Speakers” on this page)These menu settings allow you to set up speakers andsubwoofer, set the distance from your speakers to thelistening area, determine speaker levels, and set the sur-round speaker type. The Next button on each screentakes you to the next group of settings (i.e., pressing Nextat SP Selection takes you to SP Distance without havingto go back to the menu).• Macro (VR-4900/VR-4700/KRF-V9993D Users’ Guide).This menu setting allows you to create custom macrosthat perform several operations (such as turning a de-vice on, changing the receiver’s input, and changing aTV station) with a single touch.Quick Tour PowerTouch includes a Quick Tour to familiarizeyou with the options available and how to access them. Youmay want to run the Quick Tour before you begin setting updevices. To start the Quick Tour, use the stylus or your fingerto touch (Quick Tour) .To stop the Quick Tour in the middle, touch the .To change the time until the screen goes out:In order to reduce the battery consumption, the Power Touchhas been designed so that the screen goes out when there isno operation for a given time. This time can be changed.1 Touch (Setup) to call up the SETUP screen.2 Touch to call up the Standby Time setting screen.3 Touch or to set the desired time. The timeuntil the screen goes out can be changed to any valuefrom 5 to 30 seconds.4 Touch to return to the original screen.Setting Up SpeakersBefore you can begin using the receiver to control your homeentertainment system, you must set up PowerTouch to op-erate your speakers effectively. There are four areas of speakersetup:• SP Selection• SP Distance• SP Level• Surround SP TypeYou can set up your speakers in the order presented here(via the Next button) or individually, selecting each optionfrom the Surround menu.The receiver must be on, speakers must be connected, andSpeaker A on the front panel must be turned on before youcan set up speakers.The PowerTouch has four basic menus as shown below.MUSIC MOVIESETUP EDITSome icons may not be displayed with certain models.There are two ways for moving across these four basic menus:• Touch character or icon “MUSIC”, “MOVIE”,“SETUP” or “EDIT” in the screen using a sty-lus or your finger.• Touch the desired icon in the quick accessmenu on the left of the touch-screen.Quick access menuMUSIC MOVIE SETUP EDIT