Kenwood VR-4900 Connection And Setup Manual

Also see for KRF-V9993D: Service manual Service manual User guide How to operate Connection guide

Contents

36Remote SetupChapter Two : Setting Up PowerTouchc. If you set your left and right front speakers to Lrgand want to send bass to the subwoofer in all Listenmodes, touch until “On” appears above thebutton. All modes SW Re-Mix mixes some of thebass from your All the speakers back into yoursubwoofer.If you set your left and right front speakers to Nml,SW Re-Mix does not function.d. Touch to save your settings.e. Touch to move to the next speaker setting ortouch to return to the Setup Surround menu.If your front speakers are set to Nml, you can only set yourcenter and surround speakers to Nml (or Off).If you turn off the subwoofer, your front speakers are auto-matically set to Lrg. You may not set them to Nml.SP Distance1. Measure the distance from each speaker to the seat youmost often use and note it below:2. If you are not already there, touch onthe Setup Surround menu to open the Speaker Distancemenu:3. Touch or to set the distance for the left frontspeaker.4. Touch or to select the next speaker.5. Repeat steps 3 and 4 for each speaker.6. Touch to move to the next speaker setting or touchto return to the Setup Surround menu.Speakerleft frontcenterright frontright surroundleft surroundsubwooferDistance (ft or m)SP LevelIn this step you will use your ears to balance the volume levelof all the system’s speakers except the subwoofer for your roomand listening position. (To set the subwoofer level, see “Set-ting the Subwoofer Level” on page␣ 37.) When all the speak-ers are set at the same volume level, your system will create amore realistic, spacious surround sound environment.1. Eliminate as many external noise sources as possible.2. Sit in the place where you and your guests are most likelyto sit while watching movies or listening to music.3. Turn the receiver’s master volume up to -25dB. (For great-est accuracy, the level-setting procedure should be per-formed at a moderately loud listening level.)4. If you are not already there, touch onthe Setup Surround menu to open the Speaker Levelmenu:5. Touch until the Test Tone display reads “Manu”.6. Test noise will play from the left front speaker. Care-fully listen to the volume level of the noise.