39Remote SetupChapter Two : Setting Up PowerTouchWhat if my device does not work with anyof the codes on the list?What if I Want PowerTouch to ControlAdditional Functions?PowerTouch contains sophisticated features that allow it to“learn” new commands from other IR remotes. If none ofthe codes for the device and brand you select work, use thisfeature to instruct PowerTouch how to operate the device.You can also use this feature to modify commands for codesthat do work or even to add extra functionality to thosecodes.For example, let’s say the basic control codes for your VCRare Power, Play, Rewind, Fast Forward, Pause, Channel andRecord. Let’s also say that your VCR has an OSD (On ScreenDisplay) menu that is not part of the default code set youchose. You can use your VCR’s remote to teach PowerTouchto access that menu.To teach PowerTouch new commands:1. Follow the steps under “How Do I Identify Devices?” onpage␣ 37.2. Touch to open the Function Change menu:3. Select the button to be programmed by learning (In-clude “Empty 1 to Empty 8”).You will be able to access these new commands by touch-ing More or the button you assign on any device controlscreen. (Users’ Guide)4. When a button which can be renamed is selected,(Name Input) button is displayed with black charac-ters. Touch to deisplay the keyboard and enter thebutton name (Example: CD: On). If characters alreadyhave been enterd, touch to erase them. (See “HowDo I Enter Text?” on page 8 of the Users’ Guide.)Then touch on the keyboard display to establishthe entry.5. Touch the Learn button.While “Learn” is displayed, perform the next operation.If the set is left untouched for more than one minute,“Time Out” will be displayed.6. Aim the device’s remote at PowerTouch and press andhold the button on the device’s remote that correspondsto the command you want PowerTouch to learn:This may take a few seconds; do not move PowerTouchor the device’s remote until PowerTouch displays theFunction Change menu again.• “Learn Success” is displayed when learning completessuccessfully.4 inches (10 cm)BACKLIGHT• “Lean Fail” is displayed when it failed.After a learning process is completed, always touchto test the command or function that PowerTouch haslearned. If the command or function does not work,perform the learning process again.Be sure to use the device’s original remote. PowerTouchwill not learn commands from other universal remotes.7. Repeat steps 3 through 5 until you have taughtPowerTouch all the commands you want it to know. Ifyou need more function lines, touch or to ac-cess more lines.8. Touch to return to the IR Setup menu.9. Touch to return to the Setup menu.Depending on the remote control unit, "Learn" may notbe possible.