14 ENConnecting system control cords after connecting a KENWOODaudio component system lets you take advantage of convenientsystem control operations.This unit is compatible only with the [SL-16] mode. The systemcontrol operation is not available if the unit is connected in the[XS8], [XS], or [XR] connection mode.If your component has the mode select switch, set the connectedcomponents to the [SL16] mode.• You may connect the system control cord to either the up or downjack.EXAMPLE: [SL16] mode connectionsThe underlined portion represents the setting of the system controlmode.• In order to take advantage of the system control operations, thecomponents must be connected to the correct jacks. To use a CDplayer it must be connected to the CD jacks. To use a cassette deck(or MD recorder) it must be connected to the MD/TAPE jacks.When using more than one CD player (etc.) only the one connectedto the specified jacks may be connected for system control.• Some CD players and cassette decks are not compatible with the[SL16] system control mode. Do not make system connectionswith equipment that is not [SL16] compatible.• Some MD players are not system control compatible. You cannotmake system control connections to this kind of equipment.Notes1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]equipment for system operations. If your equipment consists ofthis kind of combination, please do not connect any system controlcords. Even without system control cords, normal operations canbe carried out without effecting performance.2. Do not connect system control cords to any components otherthan those specified by KENWOOD. It may cause a malfunctionand damage your equipment.3. Be sure the system control plugs are inserted all the way in to thesystem control terminals.Connecting the system controlSetting up the systemSYSTEM CONTROL OPERATIONSRemote ControlLets you operate this unit with the system remote supplied with thereceiver.Automatic OperationWhen you start playback from a source component, the input selectoron this unit switches to that component automatically.Synchronized RecordingLets you synchronize recording with the start of playback whenrecording from CD, MD or analog discs.OperationWhen the STANDBY indicator is lit, the power turns ON when you pressthe POWER key on the remote control. When the power comes ON,press the key you want to operate.• When pressing more than one remote control key successively,press the keys securely by leaving an interval of 1 second or morebetween keys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light froma high frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.Preparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.• Insert two AA-size (R6) batteries as indicated by the polarity markings.SYSTEMCONTROLSYSTEM CONTROLcordReceiverCassette deckor MD recorderCD playerRecord playerSYSTEMCONTROLcord[SL16][SL16] [XS] [XS8] [XR][SL16] [XS] [XS8][XS] Operating range(Approx.) Remote sensorInfrared ray system6 mPOWER