26 ENMidnight mode (Dolby Digital mode only)When watching movies at night , you might not be able to raise thevolume as loud as normal. Midnight mode compresses the dynamicrange of previously specified parts of the Dolby Digital sound track (likescenes with sudden increases in volume) to minimize the difference involume between the specified and non-specified parts. This makes iteasy to hear all of the sound track, even when listening at low volumes.1 Press the SOUND key repeatedly until “NIGHT” appears on thedisplay.• This can be selected only if CD/DVD, DVD/6CH or VIDEO 2 isselected as the source and the listen mode is set to “DOLBYDIGITAL.”2 Use the MULTI CONTROL knob or Joystick to select the ON orOFF setting.• The adjustment item is displayed for approximately 8 seconds.• Some Dolby Digital software may not be compatible with theMidnight mode.Panorama mode (Pro Logic IIMusic mode only)When listening to music, you will be able to enjoy the “wraparound”sound effect when you adjust the panorama mode.1 Press the SOUND key repeatedly until “PANORAMA” appears onthe display.• The PANORAMA setting indication scrolls across the display.“PANORAMA” will be scrolled from right to left.2 Use the MULTI CONTROL knob or Joystick to select PANORAMAON or OFF.1 ON : PANORAMA mode is ON.2 OFF : PANORAMA mode is OFF.Dimension mode (Pro Logic IIMusic mode only)When listening to music with certain recordings, you will also be able toachieve a suitable balance from all the speakers by adjusting thedimension mode.1 Press the SOUND key repeatedly until “DIMENSION” appears onthe display.• The DIMENSION indication scrolls across the display.2 Use the MULTI CONTROL knob or Joystick to adjust thesoundfield towards the rear or the front.Soundfield is adjusted towards the front.Soundfield is in neutral position.Soundfield is adjusted towards the rear.Center Width mode (Pro Logic IIMusic mode only)Center width adjustment allows you to enjoy an enchanced sound whenlistening to music through center image from only center speaker, or leftand right speakers or various combinations adjustments.1 Press the SOUND key repeatedly until “CENTER WIDTH” appearson the display.• The CENTER WIDTH indication scrolls across the display.• When the center speaker is switched OFF, this mode will notbe effective.2 Use the MULTI CONTROL knob or Joystick to adjust the left-center-right output.Center image will be heard from center speaker only.Center image will be heard from left and right speakers only.• When in other positions, center image from center speaker, leftand right speakers can be heard simultaneously with variouscombinations.Ambience effects