Kenwood VR-606 VR-616 Instruction Manual

Also see for VR-606: Instruction manual Instruction manual Service manual Service manual

5 ENSTANDBYDIMMERPHONES CINEMA EQLISTEN MODEINPUT MODE BAND AUTO MEMORYDSP DTS DOLBY DIGITALSOUNDSET UPMULTI CONTROL INPUT SELECTOR DOWNMUTEUPVOLUME CONTROLPOWERSPEAKERS ON ⁄ OFFON ⁄ STANDBYNames and functions of parts1 POWER ON/STANDBY key %Use to turn the power ON/STANDBY.STANDBY indicator2 DIMMER keyUse to select the REC MODE. (Use to adjust the brightness of the display.¶3 LISTEN MODE key ¢Use to select the listening mode.4 Surround indicatorsDSP mode indicator ¢Lights when the receiver is in the DSP mode.DTS mode indicator ¢Lights when the receiver is in the DTS mode.DOLBY DIGITAL indicator ¢Lights when the receiver is in the DolbyDigital mode.5 SOUND key ∞Use to adjust the sound quality and theambience effects.6 MULTI CONTROL knob %Use to control a variety of settings.7 INPUT SELECTOR knob &Use to select the input sources.8 VOLUME CONTROL knob &9 PHONES jack *Use for headphone listening.0 SPEAKERS ON/OFF keys &Use to turn the speakers ON/OFF.! CINEMA EQ key *Use to switch the status of CINEMA EQ.@ INPUT MODE key 7Use to switch between full auto, digital andanalog inputs.# BAND key )Use to select the broadcast band.$ AUTO keyUse to change “TAPE” indication to “MD”.&Use to select the auto tuning mode. )% MEMORY key )Use to store radio stations in the presetmemory.^ SET UP key %Use to select the speakers' settings etc.& MUTE key *Use to temporarily mute the sound.Main UnitDisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsBand indicatorsSTEREO indicatorFrequency display,Input display,Preset channel display,Surround mode displaySpeaker indicatorPRO LOGICindicatorAUTO DETECTindicatorDOLBY DIGITALindicatorDTS indicatorCLIP indicatorAUTO indicatorMEMO. indicatorST. indicatorTUNED indicatorMUTE indicatorTONE indicatorLOUDNESS indicator96kHzfs indicatorDSP indicatorDIGITAL indicatorCINEMA EQ. indicator6CH INPUT indicatorStandby modeWhile the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under thecondition, the system can be turned ON by the remote control unit.