Kenwood VRS-7100 Instruction Manual

Also see for VRS-7100: Service manual

Contents

30 ENListening with headphonesPHONESDUAL SOURCE VOLUME 5/∞DUAL SOURCE INPUTDUAL SOURCE ON/OFFVOLUME CONTROL1 Connect headphones to the PHONES jack.2 Use the VOLUME CONTROL knob (or the VOL +/– keys)to adjust the volume.Playing difference sources through speakers andheadphones (DUAL SOURCE function)While you enjoy audio listening through the speakers, another personcan enjoy another source (audio + video) through headphones byconnecting the source to the GAME or FRONT AUX jacks.1 Connect headphones to the PHONES jack.2 Press the DUAL SOURCE ON/OFF key to switch the DUALSOURCE function ON.÷ When the DUAL SOURCE function is ON, the video and head-phone outputs reproduce only the second input source of theDUAL SOURCE function. Switching the DUAL SOURCE functionOFF restores the main input source signals at these outputs.3 Press the DUAL SOURCE INPUT key to select the secondinput source for the DUAL SOURCE function.1 "GAME" :The "GAME" input is selected as the second input source forthe DUAL SOURCE function.2 "F. AUX" :The "F. AUX" input is selected as the second input source forthe DUAL SOURCE function.4 Press the DUAL SOURCE VOLUME 5 / ∞ to adjust theheadphone listening volume.÷ When the DUAL SOURCE function is switched ON, the inputmode is fixed at "ANALOG". The listen mode cannot bechanged. 8‚Lights upNormal playbackAdjusting the soundVOLUME CONTROLVOL /MULTI CONTROL %/fi/@/#ENTERACTIVE EQRCV ModeSoundMulti %/fi/@/#MuteActive EQEnterAdjusting the TONE (PCM stereo and analog stereo mode only)1 Press the RCV Mode key on the remote control unit to setit to the receiver control mode.2 Press the Sound key.3 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)to select "TONE", and press the ENTER (or the Enter key).4 Use the MULTI CONTROL % / fi (or the Multi % / fi keys) toselect "TONE ON", and pressthe ENTER (or the Enter key).T O OEN N5 Use the MULTI CONTROL @ / # (or the Multi @ / #keys) to select "BASS" or "TREBLE".1 "BASS" :Select this to adjust the low frequency range.2 "TREBLE" :Select this to adjust the high frequency range.6 Use the MULTI CONTROL % / fi (or the Multi % / fi keys)to adjust the sound quality.T R 1ELBE )7 Repeat steps 5 and 6 as required.÷ The bass and treble levels are adjustable from -10 to +10 in2 step increments.÷ The adjustment item is displayed for approximately 20 sec-onds.8 Press the Sound key again to return to the input indication.Lights up