Kenwood VRS-7100 Instruction Manual

Also see for VRS-7100: Service manual

Contents

36 EN1Press the PTY key to activate the PTY search mode.N E sWWhen an RDS broadcast is received, the program type is shown on thedisplay. If no PTY data is available, or if the station is not an RDSstation, "NONE" is displayed.2While the "PTY" indicator is lit, use the Tune + /-keys toselect the program type of your choice.wProgram type tableProgram Type Name Display Program Type Name DisplayPop Music POP M Weather WEATHERRock Music ROCK M Finance FINANCEEasy Listening Music EASY M Children’s Programmes CHILDRENLight Classical Music LIGHT M Social Affairs SOCIALSerious Classical Music CLASSICS Religion RELIGIONOther Music OTHER M Phone In PHONE INNews NEWS Travel TRAVELCurrent Affairs AFFAIRS Leisure LEISUREInformation INFO Jazz Music JAZZSport SPORT Country Music COUNTRYEducation EDUCATE National Music NATION MDrama DRAMA Oldies Music OLDIESCulture CULTURE Folk Music FOLK MScience SCIENCE Documentary DOCUMENTVaried Speech VARIED3Press the PTY key to start searching.Example: Searching for a Pop Music broadcast.Display while searching. BlinksP O MPProgram type name displayDisplay when a station is received. Goes outB B MF1CStation name display• No sound is heard while "PTY" is blinking.• If the desired program type cannot be found, "NO PROG" isdisplayed, then after several seconds the display returns to theoriginal display.To select another program type.Repeat steps 1, 2 and 3.Presetting RDS stations (RDS AUTO MEMORY)This function automatically stores up to 40 RDS stations in the presetmemory. In order to use the PTY function, the RDS stations must bestored in the preset memory using the RDS Auto Memory function.1Use the INPUT SELECTOR key (or the TUNER key) to selecttune as the source.2Use the BAND key (the Band key) to select he broadcast bandto "FM".3Press and hold the ENTER for more than 2 seconds will startAUTO MEMORY.A U OT M E YROMThe blinking "AUTO" display and blinking "MEMORY" displayappear alternately.• After a few minutes, up to 40 RDS stations are preset inorder from channel "01".• Stations already stored in the preset memory may be replaced byRDS stations. (i.e., If the RDS AUTO MEMORY function detects15 RDS stations, the stations currently preset at numbers 01~15will be replaced by the RDS stations.)Tuning by Program TYpe (PTY search)This function lets you set the tuner to automatically search for stationswhich are currently broadcasting the type of program (genre) you wantto listen to.Under certain receiving conditions, it may take more than 1minute to complete the search.PTYTune – 1 / + ¡BandMulti %/fiLights upUsing RDS (Radio Data System) (For Europe only)Preparations• Execute the RDS auto memory procedure.• Set the broadcast band to FM.• Tune to an RDS station.