3 Language Dictionary162 Keysight Models 6811C, 6812C, and 6813C Programming GuideVOLTage:OFFSet:SLEW:MODEThis command determines how the DC offset slew rate is controlled during atriggered output transient. The choices are as follows:– FIXed: The offset slew rate is unaffected by a triggered output transient.– STEP: The offset slew rate is programmed to the value set byVOLTage:OFFSet:SLEW:TRIGgered when a triggered transient occurs.– PULSe: The offset slew rate is changed to the value set byVOLTage:OFFSet:SLEW:TRIGgered for a duration determined by the pulsecommands.– LIST: The offset slew rate is controlled by the voltage list when a triggeredtransient occurs.VOLTage:OFFSet:SLEW:TRIGgeredThis command selects the DC offset slew rate that will be set during a triggeredstep or pulse transient. A parameter of MAXimum or INFinity sets the slew to itsmaximum possible rate. The SCPI representation for infinity is 9.9E37.Command syntax [SOURce:]VOLTage:OFFSet:SLEW:MODE Parameters FIXed | STEP | PULSe | LIST*RST value FIXedExamples VOLT:OFFS:SLEW:MODE STEPQuery syntax [SOURce:]VOLTage:OFFSet:SLEW:MODE?Returned parameters Related commands VOLT:OFFS:SLEW VOLT:OFFS:SLEW:TRIGCommand syntax [SOURce:]VOLTage:OFFSet:SLEW:TRIGgered | INFinityParameters 0 to 9.9E37 | MAXimum | MINimum | INFinityUnit V (volts per second)*RST value INFinityExamples VOLT:OFFS:SLEW:TRIG 50 VOLT:OFFS:SLEW:TRIG MAXQuery syntax [SOURce:]VOLTage:OFFSet:SLEW:TRIGgered?Returned parameters Related commands VOLT:OFFS:SLEW VOLT:OFFS:SLEW:MODE
