164 Getting Started GuideWindows Operating SystemRemote Desktop: Using the Test Set RemotelySetting up Remote Desktop operationSetting up the test setBefore the test set can be controlled through a Remote Desktop Connection, itmust be set up to allow connection from a remote computer.Setting up the remote computerThe procedure depends on whether the Remote Computer to be set up isrunning Windows XP, Windows 7, or another version of Microsoft Windows.Remote computer running Windows XP or Windows 7Windows XP and Windows 7 include the Remote Desktop Connectivity Clientsoftware, so no additional setup is required.Remote computer running another version of WindowsYou can use any 32-bit version of Windows (Windows 95, 98, ME, NT4, or2000) to install and run the Client software for Remote Desktop Connectivity.However, you need to have available a Windows XP or Windows 7 installationCD-ROM, because that contains the Client software.Table 6-2 Setting up a remote desktop connectionStep Notes1 To perform this operation successfully, youmust have Administrator level access to thetest set.The default Administrator password is:Keysight4u!2 On the test set, open the Windows ControlPanel.Using the Virtual Front Panel within the testset application, press System > ControlPanel.Or, from the Windows Desktop, click Start >Control Panel.3 Within the Control Panel, select System >System and Security.4 Click Remote Settings. A System Properties window appears, with theRemote tab displayed.5 Check the box labeled Allow RemoteAssistance connections to this computer, ifit is not already checked.6 To add users, click Select Users > Add. Follow the on-screen instructions.
