Keysight M8000 Series of BER Test Solutions User Guide 643Licenses 1010 Change the Vendor Daemon Location to the location of the Agilent.exefile:1 For 32-bit Windows, enter “C:\Program Files\Agilent\ACCL\Licensing\bin\Agilent.exe”.2 For 64-bit Windows, enter “C:\PROGRA~2\Agilent\ACCL\Licensing\bin\Agilent.exe”.11 Click Save.12 Start the daemon by pressing Start.13 To verify the status of the server, select the Dashboard tab and clickthe Concurrent button. Wait for the Web page to refresh. If the“Agilent” daemon is not selected in the vendor drop-down list in theupper right side of the Licenses page, then select it by clicking Select.You will now see the list of floating licenses that are managed bylmadmin.exe.Installing and Setting up Client PC Floating LicensesThe following procedures show how to install and set up client PC floatinglicenses. Repeat this procedure for each client PC.1 Ensure that you have the Keysight Licensing Services and the M8000software to be installed on the client PC.2 Create the Client floating license files.The Client floating license files redirect licensing requests to thelicense server. Only one client floating license file needs to be created.This client floating license file is copied and re-used by each client PC.Make a copy of the original license server floating license file. Removeall line entries except these three lines, which you must modified asshown.• “SERVER” line: Keep original text• “VENDOR” line: If the optional VENDOR line “port” number isincluded in the original server license file, remove the optional“Vendor” daemon TCP/IP port number from the line• “USE_SERVER” line: Keep original textNOTE For 64-bit Windows, the file is in “C:\Program Files (x86)”, but the Webpage does not allow you to enter a file path containing an open or closeparenthesis, so you must instead enter the short file name “C:\PROGRA~2” of the path.
