Keysight EXG and MXG X-Series Signal Generators User’s Guide 195Basic Digital Operation (Option 653/655/656/657)Waveform SequencesAssumption: A waveform sequence that has two different segments has been created and stored(see previous example on page 193).1. Select the sequence:Press Mode > Dual ARB > More > Waveform Sequences > highlight the desired sequence >Edit Selected Waveform Sequence.2. Change the first segment so that it repeats 100 times:Highlight the first segment entry and press Edit Repetitions > 100 > Enter.The cursor moves to the next entry.3. Change the repetition for the selected entry to 200:Press Edit Repetitions > 200 > Enter.4. Save the changes made in the previous steps:Press More > Name and Store > Enter.To save the changes as a new sequence:a. Press More > Name and Store > Clear Text.b. Enter a file name (for example, SINE100+RAMP200).c. Press Enter.The edited sequence saves as a new waveform sequence.Playing a SequenceIf you have not created a waveform sequence, refer to “Creating a Sequence” on page 192.1. Select a waveform sequence:a. Press Mode > Dual ARB > Select Waveform.b. Highlight a waveform sequence (for this example, SINE100+RAMP200) from the SequenceOn column.c. Press Select Waveform.The display shows the currently selected waveform (for example, Selected Waveform:SEQ:SINE100+RAMP200).To play a waveform segment individually or as part of a waveformsequence, the segment must reside in BBG media. See also, “Loading aWaveform Segment into BBG Media” on page 189.
