Using FunctionsSaving and Recalling a file46Save an instrument setupThe tester will save instrument setups to the localmemory. The maximum number of instrument setupsthat can be saved is 15.Pressing [Save] > {Save Setup} saves the currentinstrument settings to the tester’s local memory. Thetester will record the following instrument settings:• calibration moderecords FullSpan or SelectedSpan calibration mode.• measurement moderecords measurement modes with their ancroyn: RL,SWR, CL, DTF-RL, or DTF-SWR.• parametersrecords frequency/distance range, and date and time.Limit lines, if activated, will be saved using SaveSetup.Copy a screenThe Keysight N9330B offers two methods to copy ascreen:• Press [PRT SCR] to get a quick screen capture andsave the file onto an external USB memory stick ONLY.Pressing the button also activates the auto file namingeditor and automatically saves the screen shot with aname that is auto-sequential to the number of thelatest saved file, from 1 to 65533.• Pressing [Save] > {Copy Screen} allows you to save ascreen shot into local memory or external USBmemory stick that will be automatically assigned witha default file name, from 1 to 10.NO TE Insert a memory stick into the USB connector before copyingscreen.
