Using FunctionsSaving and Recalling a file47Both of the methods allow you to save the currentlydisplayed screen in JPEG format. Each screen copied isan 8-bit colored, 640×480 resolution graph. Copyscreen will include any limit lines, if shown on screen.However, a screen shot is not editable.Editing a file nameA valid file name may consist of capitalized letters (A toZ), decimal numbers (0 to 9), and symbols (dot andunderscore).Pressing [Save] > {Save Data as} accesses a dialog boxwith the last file name used. Press [ESC/CLR] to erasethe current file name, before editing or creating a newfile name.Input a new file name Use the numerical keypad toinput characters, numbers, and symbols.• A single press on a numerical button inputs a decimalnumber.• Consecutive press on a numerical button selects aletter or symbol.Recall a trace dataTo recall a trace data perform the following steps:1 Pressing [Recall] > {Recall Data} accesses a dialog boxfor selecting the trace data to be recalled.2 Rotate the knob to select a trace data.3 Press [ENTER] hardkey to confirm the selection.Trace data can be deleted from the trace data list inlocal memory by:• Press {Delete Trace} softkey to delete a trace data.• Press {Delete All} to delete all the trace data from thelist.
