Tester Features 3U1461A/U1453A User’s Guide 113Reviewing Previously Recorded Data (View)Viewing data stored in the tester’s memory isperformed through the key.1 Press and hold to View the previouslyrecorded data. Press again to cyclethrough the manual (H), interval (A), or event(E) records.If nothing has been recorded, H : Void, A : Void, or E : Void will be displayedinstead.2 Select the desired recording category to view its entries.a Press to jump to the first stored entry. Press to jump to the laststored entry.b Press to view the next stored entry. The index number increases byone. Press to view the previous stored entry. The index numberdecreases by one.c Press to clear the last stored entry for the selected log type. Pressand hold to clear all entries for the selected log type.3 Press and hold again to exit the View mode.Sanitizing the Log MemoriesYou have the option to sanitize the log memoriesof your tester. This operation erases the logmemories of your tester thoroughly. The datastored in the tester’s memory will not be able tobe reconstructed in any way after the datasanitization operation.Prior to sanitizing the log memories, ensure that all manual (H), interval (A), orevent (E) records have been cleared (see step c).When all entries are cleared(H : Void, A : Void, and E : Void), press and hold to sanitize the log memories.CAUTION The data sanitization operation may take up to 30 seconds to complete. Donot press any keys or turn the rotary switch until the data sanitizationoperation is completed.
