Setup Options 4U1461A/U1453A User’s Guide 151Changing the insulation resistance and earth-bond resistance test periodThis setting is used with insulation resistance tests (see page 67) or earth-bondresistance measurements (see page 67). The tester performs the test over thetimed period defined in this setting.To change the insulation resistance and earth-bond resistance test period:1 Press for more than 1 second to enter the Setup menu.2 Browse to Menu 9 > TEST TIME, and press to edit the value.3 Use the arrow keys to change the test period.4 Press to save your changes (or press to discard your changes).5 Press and hold until the tester restarts to return to normal operation.Changing the scan signal dwelling timeThis setting is used with insulation resistance tests (see page 67). The scan signalwill “dwell” in the present step for the length of time stated in the scan dwellingtime before incrementing to the next step.Menu Items Learn more on:TEST TIME “Changing the insulation resistance and earth-bond resistance test period” on page 151SCAN TIME “Changing the scan signal dwelling time” on page 151SCAN STEP “Changing the scan signal number of steps” on page 152RAMP STEP “Changing the ramp signal number of steps” on page 153TRIP mA “Changing the trip current value” on page 153Parameter Range Default settingTEST TIME 00:05 to 59:59 01:00
