King gates STARG8 24 Installation And Use Instructions And Warnings

Also see for STARG8 24: Quick guide Programming Installation instructions

Contents

King gates STARG8 24 Installation And Use Instructions And Warnings Manual pdf 11 page image

9EN4.3 - Total deletion of memorised transmittersThis operation deletes all memorised transmitters1. PRESS THE RADIOBUTTON FOR 4 SECONDS2. PRESS THE RADIOBUTTONFOR 1 SECOND3. MEMORY DELETION COMPLETEDThe red “radio” LED flashes(if not, consult Paragraph 16.1) The red “radio” LED flashes fast The red “radio” LED turns off4.4 - Deleting a single transmitterThis operation deletes a single transmitter from the memory.1. PRESS THE RADIOBUTTONFOR 4 SECONDS2. PRESS THE SETBUTTONFOR 1 SECOND3. PRESS A BUTTON ON THETRANSMITTER YOU WISH TOCANCELThe red “radio” LED flashes(if not, consult Paragraph 16.1)The red “radio” LED flashes and theyellow “set” LED turns on in fixed modeThe red “radio” LED flashes and theyellow “set” LED flashes4. PRESS THE SET AND RADIOBUTTONS SIMULTANEOUSLY ORWAIT 10 SECONDS TO EXIT THEPROCEDUREThe red “radio” LED and theyellow“set” LED turn off4.5 - Remote transmitter programmingThis procedure enables you to program a new transmitter (“Stylo2K” or “Stylo4K”) without accessing the control unit, but keeping close to it.To run the procedure you will require a previously programmed transmitter, to copy its functions.ON A PREVIOUSLYPROGRAMMEDTRANSMITTER, HOLDDOWN BUTTONS 1 AND 2TOGETHER FOR 4 SECONDSON THE TRANSMITTERYOU WANT TO PROGRAM,HOLD DOWN BUTTONS 1AND 2TOGETHER FOR 4 SECONDS