Lab.gruppen PLM series Operation Manual

Also see for PLM 10000Q: Supplementary guide User manual addendum Specifications Quick start Technical data

Contents

Lab.gruppen PLM series Operation Manual Manual pdf 54 page image

54 PLM Series Operation Manual rev 1.1.39. Front Panel Interface9.12.4 Meter View 4 – Input ViewRACK 3:3OKINPUT ROUTER 1ANALOG 1 (26dBU)||||||||||||||||||| -09OKINPUT ROUTER 2ANALOG 2 (26dBU)||||||||||||||||||| -09OKINPUT MIXER A1: ON / 2: OFF||||||||||||||||||| -04OKINPUT MIXER B1: ON / 2: OFF||||||||||||||||||| -04OKΩCOMBINED CHANNELSTATUS:INPUT METERSVOLTAGE CLIPFigure 9.12.4: Input meter viewInput meter view provides further input signal information. This view enables inspection of the input signal ina step before the input mixer and the HOME View input meters.Frame block:Line 1▸ INPUT METERS flag – confirms Input viewLine 2▸ Frame name – displays the frame name. Default is the PLM model name.Line 3▸ (blank)Line 4▸ Frame fault/warning – In the event of a Frame fault or warning, text describing the problem isdisplayed here.Input blocks:Line 1▸ Input router – displays which input router used.Line 2▸ Displays what type of input used for the specific input router. Analog inputs are displayed withheadroom selection and AES/EBU input is displayed with the current sample rate.Line 3▸ Input meter showing signal level at the input to the input router. A numeric indication in dB ofthe difference between the signal level and input clip level is also provided at the right-hand end of themeter.Line 4▸ Router fault/warning – In the event of a Router fault or warning, text describing the problem isdisplayed here.Button action▸ Pressing the soft button serves as a shortcut to the specific input router. See section9.13.3 for more information.Block 4Icon indicates AES/EBU Input termination state. An omega icon indicates input is terminated; no icon▸indicates input is unterminated.Pressing this soft button serves as a shortcut to AES termination selection.▸Output blocks:Line 1▸ Input mixer name – displays the input mixer name.Line 2▸ Displays the input mixer configuration. This can be altered from the Lake Controller. Both 1 and2 activated (on) indicates that the input to the Lake Processing Module is a mix of the signal from inputrouter 1 and input router 2.Line 3▸ Output meter showing signal level out from the input mixer to the Lake Processing Module. A