96 PLM Series Operation Manual rev 1.1.312. Application GuideFigure 12.7: Digital clock setup pageThe default configuration is Auto 48 detection, which is appropriate for most professional audio applications.For further information on the user interface pleaserefer to the Dolby Lake Controller Manual and theSample Rate Converter Clock (SRC Clock)configuration in section 7.2.1.When enabling Dante, the PLM will sync its digitalclock to the Dante master. If using the AES inputin conjunction with having Dante enabled, theDante master must have AES signals derived fromthe same word clock.12.7 Firmware UpgradesThis chapter describes the process for upgrading firmware in the PLM.As a responsible manufacturer, Lab.gruppen adopts a policy of continuous product development. As withall software-based products, it may be desirable from time to time to update the firmware in your PLMwith a more recent version. You can contact your Lab.gruppen dealer or distributor, or visit the Lab.gruppenwebsite for details on available updates:www.labgruppen.com/plmFirmware upgrades are downloadable from the Lab.gruppen website.PLM firmware upgrade is conducted via the network from the PC running the Lake Controller software.There are two methods of performing the upgrade: by using the Firmware Update Utility or by using theLake Controller software.
