User Tools (System Settings)624Timer Settings❖ Auto Off TimerAfter a specified period has passed, following job completion, the machineautomatically turns off, in order to conserve energy. This function is called"Auto Off".The machine status after the Auto Off operation is referred to as "Off mode", or"Sleep mode". For the Auto Off Timer, specify the time to elapse before Auto Off.Note❒ Default: 1 minute❒ Enter a time interval between 10 seconds and 240 minutes, using thenumber keys❒ From “Off mode” or “Sleep mode”, the machine is ready to use within 10seconds.❒ Auto Off may not work when error messages appear.❒ The machine may not shift to "Sleep Mode" at the set time, if the main pow-er switch has just been turned on and functions other than copier functionare still in the process of starting up.❖ Panel Off TimerSet the amount of time the machine waits before switching the panel off aftercopying has finished or performing the last operation.Note❒ Default: 1 minute❒ Enter a time interval between 10 seconds and 240 minutes, using thenumber keys.❖ System Auto Reset TimerThe System Reset setting automatically switches the screen to that of the func-tion set in Function Priority. When no operations are in progress, or when aninterrupted job is cleared. This setting determines the system reset interval.See p.55 “Function Priority”.Note❒ Default: On, 60 seconds❒ The time can be set from 10 to 999 seconds, using the number keys.❖ Copier/Document Server Auto Reset Timer (copier/Document Server)Specifies the time to elapse before copier and Document Server modes reset.Note❒ If [Off] is selected, the machine does not automatically switch to the usercode entry screen.❒ Default: On, 60 seconds❒ The time can be set from 10 to 999 seconds, using the number keys.
