Introduction1-10 UDS-10 User Guide1.9 LEDsThe device contains the following LEDs:linknet Tx/RxcollisiondiagnosticstatusTable 2 - UDS-10 LED FunctionsLED MeaningL (Green) Lights solid green to indicate network port isconnected to the network.Net Tx/Rx (Yellow) Blinks yellow to indicate network packets aretransmitting and receiving.Collision (Red) Lights solid red to indicate network collisions.Diagnostic (Red) Blinks or glows red in combination with the greenStatus LED to indicateerror detection.Red solid, green (Status LED) blinking:1x: EPROM checksum error2x: RAM error3x: Token Ring error4x: EEPROM checksum error5x: Duplicated IP address on the networkRed blinking, green (Status LED) blinking:4x: Faulty network connection5x: No DHCP response receivedStatus (Green) Lights solid green to indicate that the physical serialport does not have a connection to or from thenetwork.Blinks green to indicate that the physical serial portdoes have a connection to or from the network.
