Lantronix Device Server UDS 10 User Manual
Also see for Device Server UDS 10: User guideHardware guide
                                                                                                                                           | |
Contents
| 
ConfigureUDS-10 User Guide 3-19Table 10 - Manual Connection Address ExampleCommand String Result if remote IP is 129.1.2.3 and remote port is 1234C121.2.4.5/1 Complete override; connection is started with host 121.2.4.5, port 1C5 Connect to 129.1.2.5, port 1234C28.10/12 Connect to 129.1.28.10, port 12Autostart (Automatic Connection): If autostart is enabled, the unit automatically connectsto the remote IP address and remote port specified.Datagram Type: When selecting this option, you will be prompted for the Datagram type.Enter 01 for directed or broadcast UDP.Modem (Emulation) Mode: In Modem Mode, the unit presents a modem interface to theattached serial device. It accepts AT-style modem commands, and handles the modem signalscorrectly.Normally there is a modem connected to a local PC and a modem connected to a remotemachine. A user must dial from the local PC to the remote machine, accumulating phonecharges for each connection. Modem Mode allows you to replace modems with deviceservers, and to use an Ethernet connection instead of a phone call, without having to changecommunications applications and make potentially expensive phone calls.To select Modem Mode, set the Connect Mode to C6 (no echo), D6 (echo with full verbose),or D7 (echo with 1-character response).Note: If the unit is in Modem Mode and the serial port is idle, the unit can still acceptnetwork TCP connections to the serial port if Connect Mode is set to C6 (no echo), D6 (echowith full verbose), or D7 (echo with 1-character response).In Modem Mode, echo refers to the echo of all of the characters entered in command mode; itdoes not mean to echo data that is transferred. Quiet Mode (no echo) refers to the modem notsending an answer to the commands received (or displaying what was typed).To disconnect a connection using Modem Mode commands:• There must be 1-second guardtime (no data traffic) before sending +++. • There must not be a break longer that 1 second between +s.• There must be another 1-second guardtime after the last + is sent.• The unit acknowledges with an OK to indicate that it is in command mode.• Enter ATH and press Enter. It is echoed if echo is enabled. ATH is acknowledgedby another OK. |
Related manuals for Lantronix Device Server UDS 10
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine