ConfigureUDS-10 User Guide 3-11*** basic parametersHardware: Ethernet AutodetectIP addr – 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway setDHCP device name : not set***************** Security *****************SNMP is enabled (not IAP firmware)SNMP Community Name: (not IAP firmware)Telnet Setup is enabledTFPT Download is enabledPort 77Feh is enabledWeb Server is enabledEnhanced password is disabled***************** Channel 1 *****************Baudrate 9600, I/F Mode 4C, Flow 00Port 10001Remote IP Adr: --- none ---, Port 00000Connect Mode : C0 Disconn Mode: 00Flush Mode : 00****************** Expert *******************TCP Keepalive : 0s (not IAP firmware)Change Setup :0 Server configuration1 Channel 1 configuration5 Expert settings (not IAP firmware)6 Security7 Factory defaults8 Exit without save9 Save and exit Your choice ?Figure 13 - Setup Mode Window
