XPress DR+ User Guide 10Chapter 1: Using This GuidePurpose and AudienceThis manual describes the Lantronix XPress DR+ and XPress DR+W device servers.These device servers are members of the XPress family that work with IndustrialAutomation Protocols. The XPress DR+ W has wireless as well as wired capability.This guide provides the information needed to configure, use, and update the XPressDR+ device servers. It is for system administrators and those responsible for installingand maintaining these device servers.Summary of ChaptersThe remaining chapters in this guide include:Chapter DescriptionChapter 2: Introduction Describes the main features of the XPress DR+ and theprotocols it supports.Chapter 3: Installation andHardwareDescribes the unit's interfaces and power requirements.Provides instructions for physically connecting the unit.Chapter 4: XPress DR+W Describes the XPress DR+W and how to install andconfigure the unit initially.Chapter 5: Using DeviceInstaller Provides information for getting your unit up and running,using DeviceInstaller to assign an IP address.Chapter 6: Configuration UsingWeb ManagerDetails using the Web Manager to set parameters suchas port and server properties.Chapter 7: Configuration UsingTelnet or Serial Port (SetupMode)Provides instructions for accessing Setup Mode(command line interface) using a Telnet connectionthrough the network or a terminal or terminal emulationprogram through the serial port.Chapter 8: Setup Mode: ServerConfigurationDetails the network (server) settingsChapter 9: Setup Mode:Channel ConfigurationDetails the serial port settings.Chapter 10: Setup Mode:Advanced SettingsDetails email, expert, and security settings and explainshow to reset the unit to factory default values.Chapter 11: Firmware Upgrades Provides instructions for obtaining the latest firmware andupdating the XPress DR+.Chapter 12: Monitor Mode Provides instructions for accessing and using thecommand line interface for monitoring the network anddiagnosing problems.
