4: Network SettingsxPico® Wi-Fi® Embedded Device Server User Guide 19To View Network 1 Interface StatusUsing Web ManagerIn Network Interface Status, you can view both the current operational settings as well as thesettings that would take effect upon a device reboot. To view current access point (ap0) settings, go to Network on the menu and select Network 1-> Interface -> Status.Using XML via CLI Look for the status header: Network 1 (ap0) Link SettingsPhysical link parameters can be configured for an access point (ap0) Network Interface (seeTable 4-2).Table 4-2 Network 1 (ap0) Link SettingsTo Configure Network 1 Link SettingsUsing Web Manager To modify network (ap0) Link information, click Network on the menu and select Network 1 >Link > Configuration.Network 1 (ap0) LinkSettingsDescriptionNetwork Name (SSID) Specify the name of the wireless network (SSID) for the SoftAP.Channel Specify the channel for the SoftAP.Suite Specify the security suite to be used for the SoftAP. None = no authentication or encryption method will be used. WPA = WiFi Protected Access WPA2 = Robust Secure Network.Encryption Select one or more encryption types, listed from strongest to least strong. CCMP = Uses AES as basis and is the strongest encryption option. TKIP = Uses WEP as the basis, but adds extra checks and variations foradded protection.Passphrase Select the passphrase which may consist of up to 63 characters.Note: This configuration option becomes available only when suites WPAor WPA2 are selected. Lantronix recommends using a passphrase of 20characters or more for maximum security. Spaces and punctuationcharacters are permitted. The passphrase input is not the same as ASCIIinput (as used on some products.) ASCII is translated directly intohexadecimal bytes according to the ASCII table, while a possibly largerpassphrase is hashed into a key and provides better security through alarger range of key values.
