5: Line and Tunnel SettingsxPico® Wi-Fi® Embedded Device Server User Guide 27Using Web Manager To configure a specific line, click Line in the menu and select Line 1 -> Configuration(Table 5-1).Using XML via CLI Include in your file: name = "Line" instance = "1">To View Line StatusUsing Web Manager To view statistics for a specific line, click Line in the menu and select Line 1 -> Status.Using XML via CLI Look for the status header: = "Line" instance = "1">Tunnel SettingsTunneling allows serial devices to communicate over a network, without “being aware” of thedevices which establish the network connection between them. Tunneling parameters areconfigured using the Tunnel menu and submenus. The Tunnel settings allow you to configurehow the Serial-Network tunneling operates. Tunneling is available only on Line 1.Line SettingsThese serial settings for the tunnel apply to the Serial Line interface. The Line Settings andProtocol are displayed for informational purposes and must be configured from the Line settings.Table 5-2 Tunnel Line SettingsTo View Tunnel Serial SettingsUsing Web Manager To view the Serial Settings for a specific tunnel, click Tunnel in the menu and select Tunnel 1-> Line Settings.Using XML via CLI Include in your file: name = "Tunnel Line" instance = "1">Tunnel SerialSettingsDescriptionLine Settings Line Settings information here is display only. Go to the section, To ConfigureLine Settings to modify these settings.Protocol Protocol information here is display only. Go to the section, To Configure LineSettings to modify these settings.
