Lantronix xPico WiFi User Manual
Also see for xPico WiFi: User guide
                                                | |
Contents
| 
4: Network SettingsxPico® Wi-Fi® Embedded Device Server User Guide 24Table 4-7 WLAN Profile Advanced SettingsWLAN Quick ConnectWLAN QuickConnect allows users to view and add up to four WLAN profiles from a list of up to 20wireless devices sorted by RSSI. Details of the selected network are pre-populated, so little or noconfiguration is required by the user.To Configure WLAN Quick ConnectUsing Web Manager To view or edit an existing WLAN Quick Connect settings, click QuickConnect on the menu.Using XML via CLI Not applicable.Password Select the password consists of up to 63 characters.Note: Lantronix recommends using a passphrase of 20 characters or more formaximum security. Spaces and punctuation characters are permitted. Thepassphrase input is not the same as ASCII input (as used on some products.)ASCII is translated directly into hexadecimal bytes according to the ASCII table,while a possibly larger passphrase is hashed into a key and provides bettersecurity through a larger range of key values. This configuration option becomesavailable only when suites, WEP, WPA or WPA2 are selected.Encryption Select one or more encryption types, listed from strongest to least strong. At leastone selection will have to match the Access Points intended to connect with. CCMP = Uses AES as basis and is the strongest encryption option. TKIP = Uses WEP as the basis, but adds extra checks and variations for addedprotection.Note: In case the encryption settings on the Access Point(s) can still be chosen,the capabilities of the Access Point(s) and the other clients that need to use thenetwork need to be taken into account.This configuration option becomesavailable only when suites WPA or WPA2 are selected.WLAN Profile Advanced Settings DescriptionTX Power Maximum Specify the maximum transmission output power in dBm.Power Management Select to Enable or Disable power management, which reduces theoverall power consumption of the xPico Wi-Fi unit, but can increaselatency. Enabled = allows the xPico Wi-Fi to turn off the receiver when it isidling. Disabled = keeps the receiver on at all times.Power Management Interval Select number of beacons (100 msec interval) between 1 and 5. Theabove-mentioned latency can be up to this number “X” 100 msec.WLAN ProfileSecurity SettingsDescription |
Related manuals for Lantronix xPico WiFi
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine