30 American Dryer Corp. 112146 - 61Program Location 11 (PL11)Time For Amount To StartLocation to be viewed/changed.Press “Perm Press” key.Upper display will read “tFAS” (TimeFor Amount To Start) and the lowerdisplay will read the actual amountprogrammed. If no change, press the“Perm Press” key, otherwise press the“HI TEMP” key or the “LO TEMP” keyand then press the “Perm Press” key.Summary: The time for amount to start is programmable from 1 to 99 minutes.PL11tFASPerm Press4 HI TempPerm PressLO TempRefer to ProgrammingInstructions for instructions onentering program locations.(Wait 3-Seconds)("Hold In" to Accelerate) ("Hold In" to Accelerate)PL12Proceed to next locationto be changedTo exit program mode,open program switchTime Decrease Time Increase
