Lumel P20 User Manual

Also see for P20: User Manual & Quick Start

Contents

51. APPLICATIONThe P20 programmable transducer is designed to convert temperature,resistance, voltage from a shunt and standard signals into a constant-current or constant-voltage standard signal.The output signal is galvanicaly isolated from the input signal andsupply.The transducer compensates automatically the resistance of wires incase of resistance value measurements in a three-wire system and au-tomatically compensates the temperature of terminals in case of mea-surements from thermocouples.The transducer is fully configurable through the PD14 programmer. Bymeans of this programmer, one can change the input type, the measu-rement averaging time and rescale the analog output acc. to the indivi-dual output characteristic, and also read out the measured value.2. TRANSDUCER SETThe set of the P20 transducer is composed of:- P20 transducer 1 pc.- User’s manual 1 pc.- Plug with screw terminals 2 pcs.- Hole plug of the programmer socket 1 pcWhen unpacking the transducer, please check whether the type andexecution code on the data plate correspond to the order.