8RTD in a three-wiresystemRTD in a two-wiresystem or resistancemeasurementTC or voltage- 60... 60 mV0... 60 mV- 150... 150 mV0... 150 mVCurrent- 20... 20 mA0... 20 mA4... 20 mAVoltage- 10... 10 V0... 10 V0... 5 V4.2. External electrical connection diagramsThe transducer has two sockets of terminal strips, which two plugs withterminal screws are connected to. The way to connect external signalsis shown on the fig.1The electrical connection diagram is also situated on the transducerhousing. In case of the transducer work in an environment with highinterferences, one must apply shielded wires in the transducer input.Fig.2. Electrical connection diagrams of the P20 transducer.