Lumel P43 User Manual

Also see for P43: User manual

Contents

62. TRANSDUCER SETThe set of the P43 transducer is composed of:- P43 transducer 1 pc- user’s manual 1 pc- guarantee card 1 pc- CD disc 1 pcWhen unpacking the transducer, please check whether the typeand execution code on the data plate correspond to the order.quantities does not exceed 1 second. All quantities and configurationparameters are accessible through the RS-485 interface and the USBinterface.Transducer output signals are galvanically isolated from the inputsignal and the supply. Outside the transducer, there are socket-plug3. BASIC REQUIREMENTS ANDOPERATIONAL SAFETYIn the safety service scope, the transducer meets torequirements of the EN 61010-1 standard.Observations Concerning the Operational Safety:z All operations concerning transport, installation, andcommissioning as well as maintenance, must be carried out byqualified, skilled personnel, and national regulations for theprevention of accidents must be observed.z Before switching the transducer on, one must check thecorrectness of connections to the network.z Before removing the transducer housing, one must switch thesupply off and disconnect measuring circuits.