• To confirm that a channel hasbeen added or deleted, press theCH. ▲/▼ buttons to see if youcan or cannot select the channel.Only memorized/added channelscan be selected with CH. ▲/▼.Use the Number buttons toselect deleted channels.• If you connected an Antenna tothe TV/VCR/DVD, channels 2-69will be available to add or delete.If you connected to Cable TV,channels 1-125 will be available.• This function will not operatewhen the unit is in DVD mode.Helpful HintsAdding/Deleting Channels 19You can delete TV channels you no longer receive or seldomwatch. Or, you can add more channels if the TV/VCR/DVDdid not memorize all your favorite channels.● Before you begin, press SELECT to put theTV/VCR/DVD in TV/VCR mode.The red VCR/TVlight will appear.1 Press SETUP.2 Press ▲ or ▼ to select CHANNEL SET UP.Then, press ENTER.3 Press ▲ or ▼ to select ADD/DELETE CH. (TV)or (CATV) will appear beside ADD/DELETE CH.Thisindicates whether you connected an Antenna (TV) ora Cable TV signal (CATV) to the TV/VCR/DVD. Then,press ENTER. The menu will disappear and a TVchannel will appear.The channel number will appear,along with ADD/DELETE.4 Press ▲ or ▼ until the channel you wish to addor delete appears. You also can use the Numberbuttons or the CH. ▲/▼ buttons to choose a channel.5 Press ENTER to add or delete the channel.To add a channel, press ENTER so ADD and the chan-nel number appear in light blue (teal).To delete achannel, press ENTER so DELETE and the channelnumber appear in light red (purple).To delete another channel, repeat steps 4-5.6 Press SETUP when you are finished.ADD / DELETE08– CHANNEL SET UP –ADD / DELETE CH (CATV)AUTO CH PROGRAMMINGB– TV/VCR SETUP –TIMER PROGRAMMINGSETTING CLOCKCHANNEL SET UPUSER'S SET UPV-CHIP SET UPLANGUAGE [ENGLISH]CAPTION [OFF]ZERO RETURNTIME SEARCHINDEX SEARCHBPLAYSTOPENTERRECORD DISCMENURETURNTITLESETUPA-BREPEATSEARCH MODECLEARMODE ANGLESUBTITLEAUDIODISPLAYSPEED C.RESETSTANDBY-ON PICTURE SELECTSLEEPCH.VOL.MUTEZOOM1 2 34 5 67 8 90 +10+100REPEAT2-51,620_27MC4304_1.qx3 04.5.12 11:09 AM Page 19
