Setting the Clock (cont’d) 234 If you already know your PBS channel number,skip ahead to step 8. If you do not know thechannel number of your PBS station, press ▼ toselect AUTO CLOCK CH SEARCH.Then pressENTER.● The TV/DVD/VCR will search for a channel thatcarries a time signal. Channels that carry the timewill appear at the top of the screen. Use one ofthese channels when you enter your AUTOCLOCK CH at step 9.This may take several minutes. An ‘’_ _” appears inthe lower left corner of the screen when the searchis complete.5 Press SETUP to remove the AUTO CLOCKCH SEARCH screen.6 Press SETUP to access the menu again.7 Press ▲ or ▼ to select SETTING CLOCK.Then, press ENTER.8 Press ▼ to select AUTO CLOCK CH,then press ENTER.9 Press { or B until the channel number of yourPBS station appears. Use the channel numberyou found at step 4.10 Press SETUP to remove the menu.11 Press STANDBY-ON to turn off theTV/VCR/DVD and let the PBS channel updatethe clock.– SETTING CLOCK –AUTO CLOCKAUTO CLOCK CH SEARCHAUTO CLOCK CHMANUAL CLOCK SETD.S.T.B[ON][08][OFF]– SETTING CLOCK –AUTO CLOCKAUTO CLOCK CH SEARCHAUTO CLOCK CHMANUAL CLOCK SETD.S.T.B[ON][02][OFF]• During the Auto Clock ChannelSearch, the picture may be dis-torted.This is normal.• If there are no PBS stations avail-able, set AUTO CLOCK to off. Setthe clock manually.• If the TV/VCR/DVD is connectedto a Cable Box or SatelliteReceiver, select the local PBS sta-tion on the Cable Box/SatelliteReceiver. Set the TV/VCR/DVD tothe output channel of the CableBox/Satellite Receiver (03, 04, orAUX).Helpful Hints– AUTO CLOCK CH SEARCH –08 10 13– –PLAYSTOPENTERRECORD DISCMENURETURNTITLESETUPA-BREPEATSEARCH MODECLEARMODE ANGLESUBTITLEAUDIODISPLAYSPEED C.RESETSTANDBY-ON PICTURE SELECTSLEEPCH.VOL.MUTEZOOM1 2 34 5 67 8 90 +10+100REPEAT114,7-95-6,1020_27MC4304_1.qx3 04.5.12 11:09 AM Page 23