Magnavox 50MF231D User Manual

Also see for 50MF231D - Hook Up Guide: Specification sheet TEST LEAFLET Manual Connecting guide User manual

12Note: Emergency Alert Signalling is not possible:- when content browsing;- with analogue video sources.Notes:- You always have the possibility to remove the messagefrom the screen.- The message display will overlap whatever menuelement or other message is on the screen.Important: If you have forgotten your PIN!& Select Change PIN in the Menu preferencesmenu and press the cursor right.é Press the cursor right to enter the overridingPIN code 0-7-1-1.“ Press the cursor again and enter a new personal4-digit PIN code. The previous code is erasedand the new PIN-code is stored.Menu preferencesOSD& Select OSD.é Press the cursor right to select Normal or Minimum.Normal to activate the continuous display of the channel number (for max.10 minutes) and extended display of TV channel and program informationon screen. E.g. information on the main or auxiliary program, input signalquality of connected accessory devices, the display format, sound mode,availability of Closed Caption service, the audio language, the rating,sleeptimer setup.Minimum to activate the display of reduced channel information.Note: When Closed Captions is switched on, continuous display of the channelnumber and clock is not possible. Volume indication bar will not be visible.Show emergency alerts (EAS)This allows you to select the alert priority level of the informationdisseminated by the cable operator. The standard SCTE18 defines anEmergency Alert signalling method for use by cable TV systems to signalemergencies to digital devices such as digital set-top boxes, digital TVs anddigital VCRs.The Emergency alert signalling scheme defined in the standard allows acable operator to disseminate emergency alert information related to stateand local-level emergencies and warnings in a cost-effective and efficientway, while minimizing disruption of programming.An Emergency alert message will have one of the following priorities: Low,Medium, High or Maximum.The Emergency alert message with priority High or Maximum will alwaysbe presented. Low or Medium will be present or ignored depending onthe selected setting.Important: When the TV clock is undefined (See Setup menu, Clock, p. 13), theEmergency Alerts will be ignored.The Emergency Alert message display will contain following information:- The Emergency Alert text- The start time + date- The end time + date.& Select Show Emergency Alerts in the Menu preferences menu.é Press the cursor right and select one of the Emergency alerts options:- Always, when you always want the Emergency alert messages to bedisplayed when available;- Skip low priority, when you want the messages with low level to beignored;- Skip low/medium priority, when you only want the messages with highpriority to be displayed.Set/Change PIN& Select Set or Change PIN with the cursor down.é If no PIN-code exists yet, the menu item is set to Set PIN. Follow theinstructions on screen.If a PIN-code has previously been entered, the menu item is set to ChangePIN. Follow the instructions on screen.All number combinations from 0000 to 9999 are valid numbers.“ The Menu preferences menu reappears with a message confirming thatthe PIN has been created.Reset AV settingsThis function allows you to reset most of the picture and sound settings totheir predefined factory states.& Select Reset AV settings with the cursor down.é Press the cursor right.“ Press the OK button to erase settings and reset them to their defaultvalues.-English Française Español