20Connect Accessory Devicesfile : conn us top05 vcr -tv g.epsRECORDEROUTINOUT3AV1 :L + R + VIDEOCABLEAUDIO IN VIDEO INAV1Recorder (VCR / DVD+RW)Note: Do not place your recorder too close to the screen as some recorders may besusceptible for signals from the display. Keep a minimum distance of 20” from the screen.& Connect the RF Antenna or Cable TV cable (eventually via an optional two-waysignal splitter and/or Cable TV converter box) 1 to the RF IN socket of yourrecorder.é Connect another RF cable 2 from the output OUT of your recorder to theTV’s CABLE/ANTENNA 75 Ω x jack.“ Better playback quality can be obtained if you also connect the Video, Audio Leftand Right (only for stereo devices) AV cables 3 to the VIDEO, AUDIO L andR input jacks of AV1.If your recorder has an S-VHS video jack:For improved picture quality, connect an S-video cable to the S-VIDEO input ofAV3 instead of connecting the recorder to the VIDEO jack of AV1.S-Video does not provide audio, so audio cables must still be connected toAudio L and R of AV3 to provide sound.RECORDEROUTINCABLEOUTINOUT12AV1 :L + R + VIDEO3AV2 :L + R + VIDEO5 4AUDIO IN VIDEO INAV1AV2AUDIO IN VIDEO IN& Connect the RF antenna cable 1 of the RF IN socket of your other AV device.é Connect the RF output of the AV device to the RF input of the recorder 2.“ Connect another RF cable 4 from the output OUT of your recorder to theTV’s input CABLE/ANTENNA 75 Ω x jack.‘ To obtain better quality, also connect the Video, Audio left and Audio right cablesof both devices to AV1 (VIDEO andAUDIO L and R,) 5 and to AV2 (VIDEO and AUDIO L and R) 3.Notes:- In case of mono equipment, only the left loudspeaker reproduces sound.Use a mono to stereo adapter (not supplied) for sound reproduction via all internalloudspeakers.- When using the S-VIDEO connector do not connect any device to the AV3 VIDEO input.Recorder and other A/V devicesEnglish Française EspañolClear region ratingsThis function allows you to clear all the Region Ratings settings.& Select Clear region ratings with the cursor down.é Press the cursor right to enter the list. You are asked to enter your code. (Seebelow).Set/Change PIN& Select Set or Change PIN with the cursor down.é If no PIN-code exists yet, the menu item is set to Set PIN. Follow theinstructions on screen.If a PIN-code has previously been entered, the menu item is set toChange PIN. Follow the instructions on screen.All number combinations from 0000 to 9999 are valid numbers.“ The Menu preferences menu reappears with a message confirming thatthe PIN has been created.“ Select Start now.‘ Press OK to activate.Note:- The above 2 features (Region ratings lock and Clear region ratings) will be available only insets manufactured after the cut-off timeline, specified by the FCC mandate.