24Camera, Camcorder, Game& Connect your camera, camcorder or game as shown.é Connect to VIDEO 2 and AUDIO L 3 for mono equipment. Forstereo equipment also connect AUDIO R 3.S-VHS quality with an S-VHS camcorder is obtained by connecting theS-VHS cables with the S-VIDEO input 1 and AUDIO inputs 3.Do not connect cable 1 and 2 at the same time. This may cause picturedistortion !Headphone& Insert the plug into the headphone socket L as shown.é Press the MUTE button on the remote control to switch off the internalloudspeakers of the TV.The headphone impedance must be between 8 and 4000 Ohm. Theheadphone socket has a 3.5 mm jack.In the Sound menu select Headphone volume to adjust the headphonevolume.Side connectionsRecord with your recorderRecord a TV programYou can record a TV program using your recorders tuner without affecting your TV.& Select the channel number on your recorder.é Set your recorder to record.See the handbook for your recorder.Switching channel numbers on your TV does not disturb recording !This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.Consult the dealer or an experienced radio or television technician forhelp.Modifications -The FCC requires the user to be notified that any changes ormodifications made to this device that are not expressly approved byPhilips Consumer Electronics may void the user’s authority to operate theequipment.Cables -Connections to this device must be made with shielded cables withmetallic RFI/EMI connector hoods to maintain compliance with FCC Rulesand Regulations.Canadian notice -This Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.Avis Canadien -Cet appareil numérique de la classe B respecte toutes les exigences duRèglement sur le matériel brouilleur du Canada.Regulatory Notices - Federal Communications Commission Notice& Press the AV+ button repeatedly or select Source in the Settings menu(see p. 13) to select AV1, AV2, AV3, HDMI, Side or TV, according towhere you connected your devices.é Press the cursor up/down.“ Press OK.To select connected devices321entry 2005 side+usb.eps123English Française Español