Magnavox 50MF231D User Manual

Also see for 50MF231D - Hook Up Guide: Specification sheet TEST LEAFLET Manual Connecting guide User manual

13SourceThis menu allows you to name/label the accessory devices you have connected to theexternal inputs/outputs.& Select Source in the Setup menu.é Press the cursor right to enter the list of types of devices connected to the selectedinput.“ Select the accessory device with the cursor up/down.When you select AV1, AV2, AV3, HDMI, Side or Analog Audio In, a list appearsallowing you to identify which type of accessory device is attached to this input.The TV detects the presence of the connected device and the signal is routedappropriately.The TV can output Digital audio via the DIGITAL AUDIO OUT(SPDIF OUT)connector to an external amplifier or receiver.If your amplifier or receiver has a matching connector for Digital Audio In, you canconnect it with a single cable to the TV’s DIGITAL AUDIO OUT(SPDIF OUT).See Connect Accessory Devices, Digital Surround Receiver, p. 23.ClockThis allows you to use your TV as a clock.Note:- Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels,p. 17) features.- Closed captioning will not be displayed when the clock is being displayed. Press the clockkey again to switch off the clock if you want to see closed caption.Auto clock mode& Select Clock in the Setup menu.é Press the cursor right to select the Auto clock mode.“ Press the cursor right to instruct the TV to get the time automatically or manually.Auto clock channel (only available when Auto clock mode is set to Automatic)With the cursor buttons, select the channel number where time can be found by theTV. Typically time can be found on PBS as well as some other channels.Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menuitem can not be selected.Time - Day (only available when Auto clock mode is set to Manual)With the cursor buttons, select and enter the correct time and day.If Auto clock mode Manual has been selected, and no clock search has been done,the system will keep the entered time and day.Time zone (only available when Auto clock mode is set to Automatic)This function allows you to select your local time zone. Broadcasted timeinformation will correct the clock display for your local time.& Select Time zone with the cursor down.é Press the cursor right to select your local time zone.Daylight saving (only available when Auto clock mode is set to Automatic)Daylight saving time is automatically set by specially broadcasted signals. This menuitem allows you to disable the automatic setting of daylight saving time. This is usefulif you live in an area or state where daylight saving is not applied, but you receivechannels from other areas where daylight saving signals are broadcasted.& Select Daylight saving with the cursor down.é Press the cursor right to select Automatic for automatic clock correction fordaylight saving time, based on specially broadcasted signals.“ Select Off to disable automatic clock correction based on the specially broadcastedsignals.Most of the TV channels do not transmit clockinformation. There are a few cable channels who dobut they are at the end of the channel ring. There isno clock transmission in antenna channels. In suchcases, either clock extraction takes a long time, orthere is no clock.EnglishFrançaiseEspañol