Magnavox 50MF231D User Manual

Also see for 50MF231D - Hook Up Guide: Specification sheet TEST LEAFLET Manual Connecting guide User manual

22VIDEO INSPDIFOUTAV3AUDIO IN VIDEO INAV1AV2AUDIO IN VIDEO INDVD / Set-Top Boxconn us entry05 digitalYPbPr.eps2SPDIFOUT1AV2 :YPbPr + L + RDVD / Set-Top Boxconn us entry05 digitalRGB.epsAV1 :YPbPr + L + R2AUDIO IN VIDEO INAV1AV2AUDIO IN VIDEO INDVD / Set-Top BoxAV3 :L + R2S-VIDEO1VIDEO INSPDIFOUTAV3YPbPrRGBS-VIDEODVD Player or other accessory digital source devicesDevices with Component Video Output Connectors (YPbPr)This TV is capable of displaying 1080i, 720p and 480p DTV signals whenconnected to a DTV tuner Set Top Box. Select the output of the Set TopBox to either 1080i, 720p or 480p. A DTV signal must be available in yourarea.& Connect the three separate component video cables 1 to the devicehaving component video outputs (YPbPr), such as Set Top Boxes, DVD-players, laser-disc players, videogame players, satellite receivers or otherequipment, and to the Y, Pb and Pr jacks of AV2 on the TV.é In case of a device with digital audio, connect the audio cable 2 to theDIGITAL AUDIO IN of the device and to the DIGITAL AUDIO OUT(SPDIFOUT) of the TV.In case of a device with analog audio, connect the audio cable to thedevice’s AUDIO L and R 3 jacks and the L and R audio jacks of AV2.Devices with RGB output& Connect the device with RGB output to the Pr/R Pb/B Y/G input 1 jacks.é Connect the audio cables to the L and R AUDIO jacks of AV1 1.Devices with an S-Video connector& Connect an S-Video cable to the AV3 S-VIDEO input 1.Note: When using the S-VIDEO connector do not connect any device to the AVVIDEO input that you are using.é Connect the audio cables to the device’s AUDIO L and R jacks and tothe L and R audio AV3 jacks 2 on the TV accordingly to where youconnected the S-Video cable.Notes- If necessary, you can adjust the picture position to the center of the screen with thecursor keys.- The labels for the component video sockets may differ depending on the DVDplayer or the device connected. Although the abbreviations may vary, the letters Band R stand for the blue and red component signals, respectively, and Y indicatesthe luminance signal. Refer to the DVD player’s or devices instructions for use fordefinitions and connection details.- This television is designed to accept high definition signal standards 720p and 1080ias specified by the Electronic Industries Association standard EIA770.3.Digital devices from different manufacturers have the possibility of differing outputstandards which may cause difficulties for the television to display properly.- Due to possible digital image distortion when displaying signals from connecteddigital equipment, automatically the Auto picture setting Soft is selected. See Picturemenu, Auto picture, p. 14.Changing this setting during reviewing will not be stored as Personal setting afterswitch off.Warning: in case you notice scrolling images, wrong colors or no color, no picture, oreven combinations of these on your screen, check if the connections are done in thecorrect way or move your digital device further away from your TV.English Française Español