Connecting Antenna or Cable / SatelliteBe sure your Antenna or another Device is connected properly beforeplugging in the AC Power Cord.If connecting to an Antenna through an RF cableAny DTV Programs that are Broadcast in your area can be received forfree through an Antenna Connection.INININOUTRF cableantennaCableIf connecting Cable / Satellite Set-top Box using an RF cableIf the TV is connected to a Cable / Satellite Set-top Box via a CoaxialConnection, set the TV to channel 3/4 or the channel specified by theservice provider.Set-top BoxRF cableOUTININ RF cableantennaIf connecting Cable / Satellite Set-top Box using an HDMI cableIf the TV is connected to a Cable / Satellite Set-top Box via an HDMIcable, make sure you select the correct Source by using SOURCE key onTV or Remote Control.INININ HDMI cableHDMI cableIN OUTSet-top boxRF cableHDMI cableIf connecting Cable / Satellite Set-top Box using ComponentVideo InputIf the TV is connected to a Cable / Satellite Set-top box via ComponentVideo Input, make sure you select the correct Component Video Sourceby using SOURCE.Set-top BoxSet-top BoxSet-top BoxINININRF cableRF cableRF cableOUTOUTOUTComponent (Y/Pb/Pr)Video cablesComponent (Y/Pb/Pr)Video cablesComponent (Y/Pb/Pr)Video cablesINININOUTOUTOUTAudio (L/R) cablesAudio (L/R) cablesAudio (L/R) cablesINININConnecting a Cable / Satellite / Blu-ray Disc / DVDRecorder via Composite Connectors and Analog AudioDo Not place your Recorder too close to the Screen because someRecorders can be susceptible to harmful interference from the TV.OUTOUTCableOUTRF cableRF cableAudio (L/R) + Video cablesAudio (L/R) + Video cablesININRF cableRF cableRF cableINININSet-top boxOUTAudio (L/R) +Video cablesINBlu-ray disc/DVD recorderOUTAudio (L/R) + Video cablesINOUTOUTOUTRF cable INNote(s)● If you have any question about the DTV’s Antenna, visit www.antennaweb.org for furtherinformation.● Depending on your Antenna system, you may need different types of combiners (mixers)or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is2,000MHz or 2GHz.● For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable fromthe Antenna Input jack before moving the Unit.● If you did use an Antenna to receive Analog TV, it should also work for DTV reception.Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.● To Turn On your reception source easily between Antenna and Cable, Install an Antennaselector.● If you are not receiving a Signal from your Cable service, contact the Cable provider.Plugging in the AC Power CordMake sure that the AC power cord must be plugged to an AC outlet afterall the necessary connections are made.Caution(s)● Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltageof this Unit (120V AC).● Connecting the AC Power Cord to a Power Supply outside of this range may result inUnit failure, degradation or electrical shock.Note(s)● Each time you plug in the AC Power Cord, no operations will be performed for severalseconds. This is not a malfunction.12 .EnglishContinued on next page.