Magnavox 55MV314X Owner's Manual

Also see for 32MV304 F7: Quick start guide

Magnavox 55MV314X Owner's Manual Manual pdf 34 page image

Network settings assistantBefore you proceed to Connection test or other settings in Networksection, run the Network settings assistant to connect the TV to yourNetwork.2 Use H I to select Network settings assistant then press OK.InformationStart nowNetwork selectionStart nowStart nowReset network settingsSetting statusConnection testManual network settingsNetwork settings assistantRestore default settingsNetworkPreferencesChannelsLanguageMagnavox TVRenderer name3 Press OK to select Start now.Wireless settingSelect to use a wireless LAN to connect to the internet by a wirelessconnection.4 Use H I to select Wireless, then press OK.WiredWirelessCancelSelect your connection type.network.This TV can be connected to your home5 Use H I to select the desired setting, then press OK, and followthe On-screen Instructions.Simple ConnectSelect this setting if your router has a Wi-FiProtected Setup (WPS) button. Start scanningfor wireless networks on the TV after pressingthe WPS button on your router. If connectiontest fails, try Simple Connect again.* If it fails thenrefer to the router’s manual for more details.ScanSearch for Wireless Networks automatically andselect the Wireless Network name (SSID) fromthe list. Wireless network setting L p. 34Manual entry Set up the connection to the Wireless LANAccess Point (AP) (e.g. wireless router) manuallyby entering the Wireless Network name (SSID).* WPS (Simple Connect) cannot be used when the security protocol isset to WEP. Change the Access Point’s security mode from WEP toWPA or WPA2 (recommended).Wired settingSelect to use an Ethernet cable to connect to the internet by a wiredconnection. Please purchase shielded Ethernet cables at your local storeand use it when you connect to Network equipment.4 Use H I to select Wired, then press OK.● Connection test will start automatically. L p. 36Manual network settings2 Use H I to select Manual network settings, then press OK.Proxy settingIP setting modeAutoWirelessProxy configurationIP configurationWireless network settingNetwork selectionReset network settingsSetting statusConnection testManual network settingsNetwork settings assistantRenderer nameNetwork selection3 Use H I to select Network selection, then press OK.4 Use H I to select the desired setting, then press OK.Wired If you connect to an Ethernet cable, select Wiredto connect to the Internet.Wireless If you have a router with WPS function, selectWireless to connect to the Internet.Wireless network settingThis menu is displayed only when you set Wireless in Networkselection. In order to use a wireless network, you must set up aconnection to the AP (e.g. wireless router).3 Use H I to select Wireless network setting, then press OK.AutoSearch for wireless networks automatically and select the SSID from thelist.4 Use H I to select Auto, then press OK.5 The list of wireless networks will be displayed. Use H I to selectthe appropriate the SSID, then press OK.SelectEnter KeySelectEnter KeyRouter 4Router 3Router 2Router 1Manually enter your SSIDAuto● If you select the SSID with , WEP*2 / WPA / WPA2 Key entryscreen will appear. Enter the WEP*2 / WPA / WPA2 key of theselected wireless network using H I J K, then press OK.● If you select the SSID has a WPS, the WPS setting screen willappear. Use H I J K to select a setting, then press OK.34 .EnglishContinued on next page.