Makita DLS714 Instruction Manual

Also see for DLS714: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

10 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DLS714Blade diameter 190 mmBlade body thickness 1.3 mm - 2.0 mmHole (arbor) diameter (country specific) 20 mm or 15.88 mmMax. miter angle Left 47°, Right 57°Max. bevel angle Left 45°, Right 5°No load speed 5,700 min -1Dimensions (L x W x H) 655 mm x 430 mm x 445 mmRated voltage D.C.36 VBattery cartridge BL1815N, BL1820, BL1820B BL1830, BL1830B, BL1840, BL1840B,BL1850, BL1850B, BL1860BNet weight 13.0 kg 13.5 kgCutting capacities (H x W) with blade 190 mm in diameterMiter angle Bevel angle45° (left) 0° 5° (right)0° 40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm45 mm x 265 mm (NOTE 1) 60 mm x 265 mm (NOTE 1) –45° (left and right) 40 mm x 212 mm 52 mm x 212 mm –45 mm x 185 mm (NOTE 2) 60 mm x 185 mm (NOTE 2) –57° (right) – 52 mm x 163 mm –– 60 mm x 145 mm (NOTE 3) –1. Max. Cutting capacity when using a wood facing 20 mm thickness2. Max. Cutting capacity when using a wood facing 15 mm thickness3. Max. Cutting capacity when using a wood facing 10 mm thickness• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003SymbolsThe following show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.To avoid injury from flying debris, keepholding the saw head down, after makingcuts, until the blade has come to a com-plete stop.When performing slide cut, first pull car-riage fully and press down handle, thenpush carriage toward the guide fence.Do not place hand or fingers close to theblade.Always set SUB-FENCE to left positionwhen performing left bevel cuts. Failure todo so may cause serious injury to operator.CdNi-MHLi-ionOnly for EU countriesDo not dispose of electric equipment orbattery pack together with household wastematerial!In observance of the European Directives,on Waste Electric and ElectronicEquipment and Batteries and Accumulatorsand Waste Batteries and Accumulatorsand their implementation in accordancewith national laws, electric equipment andbatteries and battery pack(s) that havereached the end of their life must be col-lected separately and returned to an envi-ronmentally compatible recycling facility.Intended useThe tool is intended for accurate straight and mitercutting in wood.NoiseThe typical A-weighted noise level determined accord-ing to EN61029:Sound pressure level (LpA ) : 88 dB(A)

/ 164

Related manuals for Makita DLS714

Makita DLS714 Instruction Manual

This manual is suitable for:

DLS714

manualsdatabase

Your AI-powered manual search engine