Makita DLS714 Instruction Manual

Also see for DLS714: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

14 ENGLISHTo remove the blade, perform the following steps:1. Lock the handle in the raised position by pushingin the stopper pin.1Ź 1. Stopper pin2. Use the hex wrench to loosen the hex socket boltholding the center cover by turning it counterclockwise.Then, raise the blade guard and center cover.4231Ź 1. Center cover 2. Hex socket bolt 3. Hex wrench4. Blade guard3. Press the shaft lock to lock the spindle and use the hexwrench to loosen the hex socket bolt clockwise. Then removethe hex socket bolt of the spindle, outer lange and bl ade.123Ź 1. Shaft lock 2. Hex socket bolt 3. Outer lange4. If the inner lange is removed, install it on the spin -dle with its blade mounting part facing the blade. If thelange is installed incorrectly the lange will rub again stthe machine.1 2 34 56Ź 1. Outer lange 2. Saw blade 3. Inner lange 4. Hexsocket bolt (left-handed) 5. Spindle 6. Blade mount-ing partTo install the blade, perform the following steps:1. Mount the blade carefully onto the inner lange.Make sure that the direction of the arrow on the bladematches the direction of the arrow on the blade case.122Ź 1. Saw blade 2. Arrow2. Install the outer lange and hex socket bolt, andthen use the hex wrench to tighten the hex socket bolt(left-handed) of the spindle securely counterclockwisewhile pressing the shaft lock.3. Return the blade guard and center cover to itsoriginal position. Then tighten the hex socket bolt of thecenter cover clockwise to secure the center cover.4. Release the handle from the raised position bypulling the stopper pin. Lower the handle to make surethat the blade guard moves properly.5. Make sure the shaft lock has released spindlebefore making cut.For tool with the inner lange for15.88 mm hole-diameter saw bladeCountry speciicMount the inner lange with its recessed side facingoutward onto the mounting shaft and then place sawblade (with the ring attached if needed), outer langeand hex bolt.

/ 24

Related manuals for Makita DLS714

Makita DLS714 Instruction Manual

This manual is suitable for:

DLS714

manualsdatabase

Your AI-powered manual search engine